WORLDWIDE

Products

40W-65W Medical Adapter
Medical AC/DC Power Adapter AD-A2 Class II Series
Medical AC/DC Power Adapter AD-A2 Class II Series
Medical AC/DC Power Adapter AD-A2 Class II Series

PW-M065A-1YXXXB

65W AC-DC Desktop Adaptor
AC Inlet-C8

Features
*Medical 60601-1 Edition 3.2 MOPP and IEC 60601-1-11 approved
*2-prong IEC320-C8 AC inlet, Class II
*Approval IP22
*Meet DoE level VI Efficiency requirements
*3 year warranty
View More Details
PDF Datasheet (305 KB)
Description
*Dimension : L106 × W60 × H31 mm ( 4.17" × 2.36" × 1.22" )
*Weight : 0.24 kgs. ( 0.55 lbs. )
Specification
Electrical specifications
  • Input range : 90 - 264VAC
  • Frequency : 47 - 63Hz
  • Inrush current : < 50A peak @115VAC; < 100A peak @230VAC cold start @25°C
  • Input current (rms) : 2A @90VAC; 1A @264VAC max.
  • Efficiency : > 88% @average load, 115/230VAC (Except +5V model)
  • Maximum output power (Po) : 40Watts / 60Watts /65Watts
  • Hold–up time : > 10ms typical @full load, 115VAC
  • Short Circuit Protection: Auto-recovery
  • Over Load Protection: Auto-recovery
  • Over Voltage Protection: Shutdown and latch off, AC recycle
  • Over Temperature Protection: Shutdown and latch off, AC recycle [Optional]
Safety standards
  • UL60601-1 Edition 3.2
  • CSA-C22.2 No.60601-1 Edition 3.2
  • EN60601-1 Edition 3.2
  • IEC EN60601-1 Edition 3.2
  • IEC 60601-1-11 Edition 1st
EMC standards
  • EN60601-1-2 Edition 4.1
  • IEC60601-1-2 Edition 4.1
  • EN55011 Class B
  • FCC Part 18 Class B
  • CE
Environmental
  • Operating temperature : 0 to +60°C (Derate linearly 2.5% per °C from 41 to 60°C)
  • Storage temperature : -20°C to +85°C
  • Humidity: 0% ~ 95%..
  • MTBF : > 100,000 hours at full load and 25°C ambient temperature
STANDARD OUTPUT CABLE
  • AWM 1185 # 18 AWG / 1C + SHIELDING, UL 80°C 300V VW-1, 1000mm.
  • AWM 2464 # 18 / 20 AWG / 4C + SHIELDING, UL 80°C 300V VW-1, 1000mm.
  • Depends on customers requirements.
Model Output Rating Po O/P
Regulation		 Ripple & Noise
(Vp-p)		 DOE Efficiency
PW-M040A-1Y050B + 5V 8A 40W ±5% 50mV V
PW-M060A-1Y120B + 12V 5A 60W ±5% 120mV VI
PW-M060A-1Y150B + 15V 4A 60W ±5% 150mV VI
PW-M065A-1Y190B + 19V 3.42A 65W ±3% 190mV VI
PW-M065A-1Y240B + 24V 2.7A 65W ±3% 240mV VI
PW-M065A-1Y280B + 28V 2.32A 65W ±3% 280mV VI
PW-M065A-1Y480B + 48V 1.35A 65W ±3% 480mV VI
Note:
  • Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
    • Loading...
    Contact Us