Note about cookies

This site uses cookies to provide you with a better user experience. Our website uses cookies, which could include also third party cookies. For more information please visit our Privacy and Cookie Policy page. By continuing to use the site or closing this banner, you are agreeing to our terms of use. Close

WORLDWIDE

Products

Home > Products > Medical Power Supply > Medical Power Supply Open Frame > 360W Medical Power Supply Open Frame

360W Medical Power Supply Open Frame

PW-IM360B-1YXXXZ,360Watts Medical and ITE open frame power supply, 4x6, 2xMOPP, BF rated, Single Output

PW-IM360B-1YXXXZ

360Watts Medical and ITE open frame power supply, 4x6, 2xMOPP, BF rated, Single Output

Features

Both ITE & Medical Approvals.
High Power density, 360W in 6" x 4" footprint.
Medical applications Protection: Means of Patient Protection ( MOPP).
Altitude during operation: ITE up to 5000m ,Medical Below 3000m.
Meet Medical BF rated.
Main output and Standby output Power ON LED indicators.
*3 years warranty.

Add to Inquiry Cart Inquiry Cart

View More Details

PDF Datasheet

Specification

ELECTRICAL SPECIFICATIONS

Input range : 90 - 264VAC (Refer to derating curve).
Frequency : 47 - 63Hz.
Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load.
Inrush current :<40A peak @115VAC; <80A peak @230VAC cold start @25°C.
Input current (rms) : 5A @115VAC; 2.5A @230VAC max.
Efficiency : > 90% typical @full load, 230VAC.
Earth leakage current < 100uA @264VAC.
Maximum power : 360 Watts with 15CFM forced air cooling (U-channel type)
Maximum output power : 360Watts forced air, 250Watts convection cooling.
SHold-up time : > 10ms typical @full load, 115VAC.
Short circuit protection : Auto-recovery.
Over power protection : 105% to 150% maximum rating, Auto-recovery.
Over voltage protection : Latching type. AC Recycle.
5Vsb meet ErP 0.5W @ No load.
Remote control ( Inhibit ) function.

Environmental

Operating temperature : 0 to +70°C (Refer to derating curve).
Storage temperature: -20°C to +85°C.
Humidity: Non-condensing 0% to 90%.
MTBF : > 250,000 hours @full load and 25°C ambient temperature per Telcordia(Bellcore TR-332).

Safety Standards

UL60601-1 3.1^rd Edition
UL/c-UL UL60950-1
EN60601-1 3.1^rd Edition
TUV EN60950-1
IEC EN60601-1 3.1^rd Edition
CB IEC 60950-1

EMC Standards

IEC60601-1-2 Ed4:2014
EN60601-1-2 Ed4:2015
EN55024
EN55011 Class B
EN55032 Class B
FCC Part 15 Class B
FCC Part 18 Class B
CE

RoHS compliant

Dimension : L152.4 × W101.6 × H30.0 mm ( 6" x 4" x 1.18" )
Weight : 0.48 kgs. (1.06 lbs. )

Model no.	Output Voltage (V1)	Maximum Load (V1)		Output Regulation (V1)	Ripple Noise (V1)	Standby supply (V2)	FAN output (V3)	Convection total power	20CFM Forced air total power
Model no.	Output Voltage (V1)	Convection	18 CFM Forced Air	Output Regulation (V1)	Ripple Noise (V1)	Standby supply (V2)	FAN output (V3)	Convection total power	20CFM Forced air total power
PW-IM360B-1Y120Z	+12V	20.84A	30.00A	±3%	120mV	5V/0.5A	12V/0.3A	250W	360W
PW-IM360B-1Y240Z	+24V	10.42A	15.00A	±3%	240mV	5V/0.5A	12V/0.3A	250W	360W
PW-IM360B-1Y280Z	+28V	8.93A	12.86A	±2%	280mV	5V/0.5A	12V/0.3A	250W	360W
PW-IM360B-1Y480Z	+48V	5.21A	7.50A	±2%	300mV	5V/0.5A	12V/0.3A	250W	360W
PW-IM360B-1Y540Z	+54V	4.63A	6.67A	±2%	300mV	5V/0.5A	12V/0.3A	250W	360W

Note:
1. Output connector options: Z=T ( Terminal block type, pitch 8.25mm): Suitable for all voltages PW-IM360B-1Y240Z PW-IM360B-1Y280Z PW-IM360B-1Y480Z PW-IM360B-1Y540Z Z=C ( Connector type, pitch=3.96mm ): Suitable for 24V up
2. All models are equiped with 5Vsb & 12V fan outputs.
3. All models have total power 250W Max. convection or 360W Max. forced air cooling.
4. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector. POWER WIN TECHNOLOGY CORP