WORLDWIDE

Products

150W Open Frame Power Supply

PW-150B-XYXXU

150W AC-DC Open Frame/U Channel
L 127 × W 80.5 × H 40 mm

Features
*Build-in active PFC function, PF > 0.9
*Compact design for multiple outputs
*Dual to Quad output, Flexible DC output combination from 3.3V to 48V
*3 year warranty
View More Details
PDF Datasheet (921 KB)
Description
Open Frame Type
*Dimension: L127 × W76.2 × H34.5mm (5" x 3" x 1.36")
*Weight : 0.39 kgs. ( 0.86 lbs. )

U-Channel Type
*Dimension: L127 × W80.5 × H40mm (5" x 3.17" x 1.57")
*Weight : 0.5 kgs. ( 1.11 lbs. )
Specification
ELECTRICAL SPECIFICATIONS
  • Input range : 90-264VAC
  • Frequency : 47 - 63Hz
  • Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load
  • Inrush current : < 40A peak @115VAC; < 80A peak @230VAC cold start @25°C
  • Input current (rms) : 2.5A @115VAC; 1.25A @230VAC max.
  • Efficiency : > 80% typical @full load, 115VAC
  • Maximum output power (Po) : 150 Watts forced air, 120 Watts convection cooling
  • Hold–up time : > 16ms typical @full load, 115VAC
  • Short circuit protection : Auto recovery
  • Over load protection : 110% to 160% maximum rating, Auto-recovery
  • Over temperature protection: Automatic shutdown
    (The temperature sensing point is located at HS1, OTP threshold is 88±4°C typical.)
Environmental
  • Operating temperature : 0 to +60°C (Derate linearly 2.5% per °C from 41 to 60°C)
  • Storage temperature: -40°C to +85°C
  • Humidity: Non-condensing 5% to 95%
  • MTBF : > 100,000 hours @full load and 25°C ambient temperature
Safety Standards
  • UL UL60950-1
  • UL UL62368-1
  • CSA 22.2-No.60950-1
  • CSA 22.2-No.62368-1
  • Nemko EN60950-1
  • TUV EN62368-1
  • CB IEC60950-1
  • CB IEC62368-1
EMI Standards
  • FCC Class B Part 15
  • CISPR22 Class B
  • EN 55032 Class B
  • EN 55024
  • CE
Model no. Output voltage Minimum load Convection Forced air 30CFM Total Regulation Ripple & Noise(Vp-p)
Maximum load Combined Load Max. Max. Po Maximum Load Combined Load Max. Max. Power
PW-150B-4Y01X V4 +3.3V 0A 10A 75W 120W 12A 90W 150W ±5% 50mV
V3 +5V 0A 10A 12A ±5% 50mV
V2 +12V 0.15A 6A 7.5A ±5% 120mV
V1 +24V 0.15A 3.5A   4.5A   ±5% 240mV
PW-150B-4Y02X
V4 +3.3V 0A 10A 105W 120W 12A 125W 150W ±5% 50mV
V3 +5V 0A 10A 12A ±5% 50mV
V2 +12V 0.15A 6A 7.5A ±5% 120mV
V1 -12V 0.15A 1.5A   2.5A   ±8% 120mV
PW-150B-4Y03X
V4 +3.3V 0A 10A 105W 120W 12A 125W 150W ±5% 50mV
V3 +5V 0A 10A 12A ±5% 50mV
V2 +15V 0.1A 2.5A 3.5A ±5% 150mV
V1 -15V 0.1A 1.25A   1.75A   ±8% 150mV
PW-150B-4Y04X
V4 +3.3V 0A 10A 105W 120W 12A 125W 150W ±5% 50mV
V3 +5V 0A 10A 12A ±5% 50mV
V2 +12V 0.15A 6A 7.5A ±5% 120mV
V1 +48V 0.15A 0.5A   1.0A   ±8% 480mV
PW-150B-4Y05X
V4 +5V 0A 10A 75W 120W 12A 90W 150W ±5% 50mV
V3 +12V 0.1A 6A 7.5A ±5% 120mV
V2 +24V 0.15A 3.5A   4.5A   ±5% 240mV
V1 -12V 0.15A 1.5A 1.5A ±5% 120mV
PW-150B-4Y06X
V4 +5V 0A 10A 75W 120W 12A 90W 150W ±5% 50mV
V3 +12V 0.15A 6A 7.5A ±5% 120mV
V2 +24V 0.15A 3.5A   4.5A   ±5% 240mV
V1 -15V 0.15A 1A 1.0A ±8% 150mV
PW-150B-4Y07X
V4 +3.3V 0A 10A 75W 120W 12A 90W 150W ±5% 50mV
V3 +5V 0A 10A 12A ±5% 50mV
V2 +12V 0.15A 6A 7.5A ±5% 120mV
V1 +28V 0.15A 3A   4.0A   ±5% 280mV
Note:
  • Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 47uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
  • Loading...