WORLDWIDE

Products

400W / 500W Medical Power Supply Open Frame

PW-400B-1YXXXTM

400W AC-DC Open Frame/Top Fan
L 127 × W 81 × H 68 mm

Features
*Both ITE & Medical Approvals
*High Power density, 400W in 5" x 3.2" footprint.
*Medical applications Protection: Means of Patient Protection ( MOPP).
*Altitude during operation: ITE up to 5000m ,Medical Below 3000m.
*Meet Medical BF rated.
*Main output and Standby output Power ON LED indicators.
*3 years warranty
PDF Datasheet (2.1 MB)
Description
U-Type (U Channel)
*Dimension : L127 x W81 x H38.1mm
*Weight : 575g (1.27lbs.)

E-Type (U Channel with cover)
*Dimension : L127 x W81 x H42.1mm
*Weight : 617g(1.36lbs.)

T-Type (Top mounted fan)
*Dimension : L127 x W81 x H68mm
*Weight : 657g(1.45lbs.)
Specification
ELECTRICAL SPECIFICATIONS
  • Input range : 90 - 264VAC (Refer to derating curve).
  • Frequency : 47 - 63Hz.
  • Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load.
  • Inrush current : < 45A peak @115VAC; < 80A peak @230VAC cold start @25°C
  • Input current (rms) : 4.2A @115VAC; 2.1A @230VAC max.
  • Efficiency : > 91% typical @full load, 230VAC.
  • Earth leakage current < 100uA @264VAC.
  • Maximum output power : 400Watts forced air, 250Watts convection cooling.
  • Hold-up time : > 10ms typical 50% load, 115VAC
  • Short circuit protection : Auto-recovery.
  • Over power protection : 105% to 150% maximum rating, Auto-recovery.
  • Over voltage protection : Auto-recovery
  • 5Vsb meet ErP Lot 6 0.5W @ No load.
  • Remote control ( Inhibit ) function.
Environmental
  • Operating temperature : -20 to +70°C. (Refer to "Derating Curve")
  • Operating Humidity: Non-condensing 10% to 90%.
  • Storage temperature: -20°C to +85°C.
  • Storage Humidity: Non-condensing 0% to 90%.
  • MTBF : > 250,000 hours @full load and 25°C ambient temperature per telcordia(Bellcore TR-332).
Safety Standards
  • UL60601-1 3.1rd Edition
  • TUV EN60601-1 3.1rd Edition
  • CB IEC60601-1 3.1rd Edition
  • UL/c-UL UL62368-1
  • TUV EN62368-1
  • CB IEC62368-1
EMI Standards
  • IEC60601-1-2 Ed4:2014
  • EN60601-1-2 Ed4:2015
  • EN 55011 Class B
  • EN55032 Class B
  • EN55024 Class B
  • FCC Part 15 Class B
  • FCC Part 18 Class B
  • CE
Model no. Output Voltage (V1) Maximum Load (V1) Output Regulation (V1) Ripple Noise (V1)
Standby supply
(V2)
FAN output (V3) Convection total power Forced air
total power
25CFM
Convection Forced Air
25CFM
PW-400B-1Y120CM +12V 20.84A 33.33A ±3% 240mV 5V/0.3A 12V/0.25A 250W 400W
PW-400B-1Y240CM +24V 10.42A 16.66A ±3% 300mV 5V/0.3A 12V/0.25A 250W 400W
PW-400B-1Y280CM +28V 8.93A 14.28A ±3% 300mV 5V/0.3A 12V/0.25A 250W 400W
PW-400B-1Y480CM +48V 5.21A 8.33A ±3% 300mV 5V/0.3A 12V/0.25A 250W 400W
PW-400B-1Y540CM +54V 4.63A 7.40A ±3% 300mV 5V/0.3A 12V/0.25A 250W 400W
PW-400B-1Y120TM +12V 33.33A -- ±3% 240mV 5V/0.3A 12V/0.25A 400W --
PW-400B-1Y240TM +24V 16.66A -- ±3% 300mV 5V/0.3A 12V/0.25A 400W --
PW-400B-1Y280TM +28V 14.28A -- ±3% 300mV 5V/0.3A 12V/0.25A 400W --
PW-400B-1Y480TM +48V 8.33A -- ±3% 300mV 5V/0.3A 12V/0.25A 400W --
PW-400B-1Y540TM +54V 7.40A -- ±3% 300mV 5V/0.3A 12V/0.25A 400W --
Note:
  • Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 100uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
  • Regulation shows the percentage of absolute value of nominal output voltage.
  • Model option : C = E, E-Type (U Channel with cover)、C = U, U-Type (U Channel)
  • -1 to -20°C ambient temperature and EMS Immunity worse case O/P Regulation≦ +/-10%
  • Standby supply (V2) O/P Regulation +/-10%、Ripple and noise 150mV.
  • The switching frequency of this series is set within 58 to 75KHz at full load.


  • Loading...