Description
*Dimension : L 222×W 112×H45 mm ( 8.74"x4.4"x1.77" )
*Weight : 1.57 kgs. ( 3.46 lbs. )
Specification
Electrical specifications
- Input range : 90 - 264VAC
- Frequency : 47 - 63Hz
- Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load
- Inrush current : < 35A peak @115VAC; < 70A peak @230VAC cold start @25°C
- Input current (rms) : 3A @115VAC; 1.5A @230VAC max.
- Efficiency : > 88% (Average) 25 %, 50 %, 75 % and 100 % of full load @ 115/230VAC
- Touch current < 100uA @264VAC
- Maximum output power (Po) : 300 Watts convection cooling
- Hold-up time : > 10ms typical @full load, 115VAC
- Short circuit protection : Auto-recovery
- Over load protection : 105% to 150% maximum power, Auto-recovery
- Over voltage protection : Auto-recovery
Safety standards
- UL/cUL 60601-1 3.1rd Edition
- TUV EN60601-1 3.1rd Edition
- CB IEC60601-1 3.1rd Edition
- TUL/cUL UL60950-1
- UL/cUL 62368-1
- TUV EN60950-1
- TUV EN62368-1
- CB IEC 60950-1
- CB IEC 62368-1
- CCC ( Class I )
- PSE ( Class I )
EMC standards
- EN60601-1-2 Ed4:2015
- IEC60601-1-2 Ed4:2014
- EN 55011 Class B
- EN55032 Class B
- EN55024 Class B
- FCC Part 15 Class B
- FCC Part 18 Class B
- CE
Environmental
- Operating temperature : -30 to +60°C (Refer to "Derating Curve")
- Cooling:Convection-cooling
- Storage temperature: -30°C to +85°C
- Humidity: Non-condensing 0% to 95%
- MTBF : > 200,000 hours @full load and 25°C ambient temperature based on Bellcore TR-332
DC OUTPUT & FEATURES
| Model |
Output Rating |
Po |
OutputRegulation |
Ripple & Noise
(Vp-p) |
Efficiency Level |
| PW-IM300A-1Y120MZ |
+12V |
25A |
300W |
±5% |
240mV |
VI |
| PW-IM300A-1Y150MZ |
+15V |
20A |
300W |
±5% |
300mV |
VI |
| PW-IM300A-1Y190MZ |
+19V |
15.97A |
300W |
±5% |
300mV |
VI |
| PW-IM300A-1Y240MZ |
+24V |
12.5A |
300W |
±5% |
300mV |
VI |
| PW-IM300A-1Y280MZ |
+28V |
10.71A |
300W |
±5% |
300mV |
VI |
| PW-IM300A-1Y480MZ |
+48V |
6.25A |
300W |
±5% |
300mV |
VI |
| PW-IM300A-1Y540MZ |
+54V |
5.56A |
300W |
±5% |
300mV |
VI |
Note:
Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 47uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
Z=1 : Class I, AC INLET : IEC 320-C14(3PIN), Z=2 : Class II, AC Inlet : IEC 320-C18(2PIN)
-30 to -20°C Output regulation is ±10%.
