Products

40W / 65W Open Frame Power Supply
  • Facebook
  • Plurk
  • Twitter
  • Sina
  • LINE

40/65Watts Single Output U channel/Enclosed/Din-Rail

PW-040/065E-1YXXXZ

Features

* Less than 150mW no-load power consumption and high efficiency.
* Meet LPS except +5V model, +24V model meet Class 2 Output.
* Altitude during operation up to 5000m.
* Main output Power ON LED indicators.
* Black anodized chassis coating available.
* 3 years warranty.
View More Details
PDF Datasheet (421 KB)
Specification
Electrical specifications
  • Input range : 90 - 305VAC
  • Frequency : 47 - 63Hz
  • Inrush current :<35A peak @115VAC; <65A peak @230VAC cold start @25°C.
  • Input current ( rms ) : 2.5A @115VAC; 1.25A @230VAC max.
  • Efficiency : > 89% typical @full load, 115/230VAC.
  • Touch current < 100uA @264VAC
  • Maximum output power ( Po ) : 65 Watts convection cooling
  • Hold-up time : > 10ms typical @full load, 115VAC
  • Short circuit protection : Auto-recovery
  • Over load protection : 105% to 160% maximum rating, Auto-recovery
  • Over voltage protection : Latching type. AC Recycle
Safety standards
  • UL/c-UL UL60950-1
  • TUV EN60950-1
  • CB IEC 60950-1
EMC standards
  • FCC Class B
  • CISPR22 Class B
  • EN55032 Class B
  • CE
Environmental
  • Operating temperature :Operating temperature : -10 to +70°C.
    ( Derate linearly 2.5% per °C from 51 to 70°C, Derate linearly 1.0% per °C from 0 to -10°C )
  • Storage temperature: -20°C to +85°C
  • Humidity: Non-condensing 5% to 95%
  • MTBF : > 100,000 hours @full load and 25°C ambient temperature
RoHS compliant
  • U-channel type
  • Dimension : L120.7 × W63.5 × H38.1 mm ( 4.75" x 2.50" x 1.50" )Weight : 0.25 kgs. (0.55 lbs. )
  • Enclosed type
  • Dimension : L120.7 × W63.5 × H38.1 mm ( 4.75" x 2.50" x 1.50" )Weight : 0.27 kgs. (0.60 lbs. )
  • Din-Rail type
  • Dimension : L120.7 × W63.5 × H47.2 mm ( 4.75" x 2.50" x 1.86") Weight : 0.29 kgs. (0.64 lbs. )
DC OUTPUT & FEATURES
Model No. Output Voltage(V1) Minimun Load Max. Load Output
Max.
Watts
Output
Regulation
Ripple & Noise (Vp-p)
Efficiency
Level
LPS
PW040E-1Y050Z +5V 0A 8.00A 40W ±3% 100mV VI
PW-065E-1Y120Z +12V 0A 8A 65W ±3% 120mV VI
PW-065E-1Y150Z +15V 0A 4.34A 65W ±3% 150mV VI
PW-065E-1Y180Z +18V 0A 3.62A 65W ±3% 180mV VI
PW-065E-1Y240Z +24V 0A 2.71A 65W ±3% 240mV VI
PW-065E-1Y280Z +28V 0A 2.33A 65W ±3% 280mV VI
PW-065E-1Y480Z +48V 0A 1.36A 65W ±2% 280mV VI
PW-065E-1Y540Z +54V 0A 1.21A 65W ±2% 280mV VI

Note: 1. Model options: Z = U U-channel Z = E Enclosed Z = D Din-Rail 2. Input/Output connector : Terminal block type, pitch 9.5mm 3. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector. 4. The output voltage is set by manufacturer.