WORLDWIDE

Products

101W-250W Desktop Power Supply
AD-A8 150Watts ES Series DOE level VI and EU tier 2 Efficiency Compliant
AD-A8 150Watts ES Series DOE level VI and EU tier 2 Efficiency Compliant
AD-A8 150Watts ES Series DOE level VI and EU tier 2 Efficiency Compliant

A13130-XXZ

130W AC-DC Desktop Adaptor
AC Inlet-C14

Features
*ITE and Household Approvals
*3-pin IEC320-C14 or C6 Class I and 2-pin IEC320-C18 or C8 Class II models available
*Altitude during operation: 62368-1 :5000m, 61558-1 :2000m
*< 0.15W No Load Input Power
*Touch current less than 250uA
*Power ON LED indicator
*3 year warranty
View More Details
PDF Datasheet (442 KB)
Description
*Dimension : L 153×W 70×H 35 mm ( 6.03"x2.76"x1.38" )
*Weight : 0.57kgs. ( 1.26 lbs. )
Specification
Electrical specifications
  • Input range : 90 - 264VAC
  • Frequency : 47 - 63Hz
  • Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load
  • Inrush current : < 50A peak @115VAC; < 100A peak @230VAC cold start @25°C
  • Input current (rms) : 2.2A @115VAC; 1A @230VAC max.
  • Efficiency : > 89% @average Efficiency, 115/230VAC
    92% @ 75% Full load, 230VAC (91% @ 12Vdc)
  • Maximum output power (Po) : 130Watts
  • Hold–up time :> 20ms typical @ 100% Full load
  • Short Circuit Protection: Auto-recovery
  • Over Load Protection: Auto-recovery
  • Over Voltage Protection: Latch off
  • Over temperature protection: Auto-recovery
Safety standards
  • UL 62368-1
  • TUV EN62368-1
  • CB IEC 62368-1
  • IEC/EN 61558-1( Class II)
  • IEC/EN 61558-2-16(Class II)
EMC standards
  • EN (BS EN) 55032 Class B
  • EN (BS EN) 55035 Class B
  • FCC Part 15 Class B
  • EN55014-1
  • EN55014-2
  • ICES-003
  • CE.
Environmental
  • Operating temperature: -20 to +60°C (Refer to derating curve)
  • Operating Humidity: 10% to 95%, Non-condensing
  • Storage temperature: -20°C to +85°C, Non-condensing
  • Storage Humidity: 0% to 95%, Non-condensing
  • MTBF : > 300,000 hours @full load and 25°C ambient temperature based on Telcordia SR-332( Bellcore)
Standard output cable
  • 1.AWM 11353 # 14 AWG / 1C + SHIELDING ( or 16AWG+1) , UL 80°C 300V VW-1, 1000 mm.
  • 2. AWM 2464 # 18 AWG / 4C + SHIELDING, UL 80°C 300V VW-1, 1000 mm.
  • 3. Depends on customers requirements.
DC OUTPUT & FEATURES
※ Other DC output 140W for 12-14V, 150W for 15-26V, 33-39V and 44-52V.
Model Output Rating Po O/P Regulation Ripple & Noise
(Vp-p)		 Peak Power
(3s)		 Maximum
Capacitive
Load		 Efficiency
Level
A13130-12Z +12V 10.83A 130W ± 5% 120mV 150W 13000uF VII
A13130-19Z +19V 6.84A 130W ± 5% 150mV 150W 11000uF VII
A13170-24Z +24V 5.41A 130W ± 5% 200mV 150W 9000uF VII
A13170-36Z +36V 3.61A 130W ± 5% 200mV 150W 5000uF VII
A13170-48Z +48V 2.7A 130W ± 5% 200mV 150W 2700uF VII
Note:
  • Note: 1. AC Inlet Z=A : Class I, IEC320-C14, Z=B : Class I, IEC320-C6, Z=C : Class II, IEC320-C18, Z=D : Class II, IEC320-C8.
    2. Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 47uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
    3. AC Inlet Z=A : Class I, IEC320-C14, Z=B : Class I, IEC320-C6, Z=C : Class II, IEC320-C18, Z=D : Class II, IEC320-C8.
    4. -1 to -20°C ambient temperature and EMS Immunity worst case O/P Regulation≦ +/-10%.
    5. The switching frequency of this series is set within 60 to 90KHz at full load.
    6. Peak power is usually applied at a typical nominal input voltage.

    • Loading...
    Contact Us