Description
*Dimension : L170 × W85 × H44 mm ( 6.69" × 3.35" × 1.73")
*Weight : 0.79 kgs ( 1.73 lbs. )
Specification
Electrical Specifications
- Input range : 90 - 264VAC
- Frequency : 47 - 63Hz
- Power Factor : > 0.95 @115VAC; > 0.90 @230VAC @full load
- Inrush current : < 50A peak @115VAC; < 100A peak @230VAC cold start @25°C
- Input current (rms) : 2.5A @115VAC; 1.3A @230VAC max.
- Efficiency : > 89% @average load, 115/230VAC
- Touch current < 100uA @264Vac
- Maximum output power (Po) : 170/175watts
- Hold–up time : > 10ms typical @full load, 115VAC
- Short Circuit Protection: Auto-recovery
- Over Load Protection: Auto-recovery
- Over Voltage Protection: Latch off, AC recycle
Environmental
- Operating temperature : -20 to +60°C (Refer to derating curve)
- Storage temperature : -20°C to +85°C
- Operating Humidity: 10% ~ 95% non-condensing
- Storage Humidity: 0% ~ 95% non-condensing
- MTBF : > 400,000 hours at full load and 25°C ambient temperature based on Bellcore TR-332
Safety Standards
- UL/cUL 60601-1 3.1rd Edition
- TUV EN60601-1 3.1rd Edition
- CB IEC60601-1 3.1rd Edition
Class II Versions Exclusive
- EN60601-1-11 1st Edition
- IEC60601-1-11 1st Edition
EMC Standards
- EN60601-1-2 Ed4:2015
- IEC60601-1-2 Ed4:2014
- EN 55011 Class B
- FCC Part 18 Class B
- CE
Standard Output Cable
- AWM 2464 # 16 AWG / 3C + SHIELDING, UL 80°C 300V VW-1, 1050 mm. (12V, 15V & 19V)
- AWM 2464 # 18 AWG / 3C + SHIELDING, UL 80°C 300V VW-1, 1050 mm. (24V, 28V, 36V, 48V & 54V)
- Depends on customers requirements.
DC Output & Functions
| Model No. |
Output Rating |
Po |
O/P
Regulation |
Ripple & Noise
(Vp-p) |
DOE Efficiency |
EU ErP |
| PW-M170A2-1Y120HZ |
12V |
14.17A |
170W |
±5% |
120mV |
VI |
Tier 2 |
| PW-M175A2-1Y150HZ |
15V |
11.67A |
175W |
±5% |
120mV |
VI |
Tier 2 |
| PW-M175A2-1Y190HZ |
19V |
9.22A |
175W |
±5% |
150mV |
VI |
Tier 2 |
| PW-M175A2-1Y240HZ |
24V |
7.30A |
175W |
±3% |
150mV |
VI |
Tier 2 |
| PW-M175A2-1Y280HZ |
28V |
6.25A |
175W |
±3% |
150mV |
VI |
Tier 2 |
| PW-M175A2-1Y360HZ |
36V |
4.87A |
175W |
±3% |
200mV |
VI |
Tier 2 |
| PW-M175A2-1Y480HZ |
48V |
3.65A |
175W |
±3% |
200mV |
VI |
Tier 2 |
| PW-M175A2-1Y540HZ |
54V |
3.25A |
175W |
±3% |
200mV |
VI |
Tier 2 |
Note:
Ripple and noise are measured at oscilloscope 20MHz bandwidth by a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
AC Inlet Z=1 : Class I, IEC320-C14, Z=2 : Class I, IEC320-C6, Z=3 : Class II, IEC320-C18, Z=4 : Class II, IEC320-C8
The switching frequency of this series is set within 65 to 90KHz at full load.
