WORLDWIDE

Products

40W / 65W / 85W Open Frame Power Supply
B13085-XX
B13085-XX B13085-XX B13085-XX
B13085-XX
B13085-XX
B13085-XX

B13085-XX

85W/50Watts ITE Single Output
( L 76.2 × W 38.1 × H 32 mm )

Features
*Compact, High Power density, 85W/50W in 1.5" x 3" footprint
*Meet US DOE level VI & EU ErP requirements.
*Less than 150mW no-load power consumption.
*Suitable for both Class I and Class II application(Refer to note 2. at mechanical specification)
*3 year warranty
View More Details
PDF Datasheet (883 KB)
Description
RoHS compliant
*Dimension : L76.2 × W38.1 × H32mm ( 3" × 1.5" × 1.26" )
*Weight : 0.1 kgs. ( 0.22 lbs. )
Specification
Electrical specifications
  • Input range : : 90 - 264VAC
  • Frequency : 47 - 63Hz
  • Inrush current :< 50A peak @115VAC; <100A peak @230VAC cold start @25°C(Except 5V model)
    •                         < 65A peak @115VAC; <130A peak @230VAC cold start @25°C(5V model)
  • Input current (rms) : 2A @115VAC; 1A @230VAC max.
  • Efficiency : > 90% & +5V> 88% @Full load & 230VAC input.
  • Maximum output power ( Po ) : 85Watts/50Watts by 10CFM Forced Air
  • Hold-up time : > 8ms typical @115VAC, 70% of 85Watt load, +5V@50W load.
  • Short circuit protection : Auto-recovery
  • Over load protection : 105% to 160% maximum rating, Auto-recovery
  • Over voltage protection : Latch off.
  • Over temperature protection : Latch off.
Safety standards
  • UL/c-UL UL62368-1
  • TUV EN62368-1
  • CB IEC 62368-1
EMC standards
  • FCC Part 15 Class B
  • EN (BS EN) 55032 Class B
  • EN (BS EN) 55035
  • ICES-003
  • CE
  • CE
Environmental
  • Operating temperature : -20 to +70°C (Refer to derating curve).
  • Storage temperature: -20°C to +85°C.
  • Operating Humidity : 10% to 95%, non-condensing
  • Storage Humidity : 0% to 95%, non-condensing
  • MTBF : > 450,000 hours @full load and 25°C ambient temperature per Telcordia(Bellcore TR-332).
DC OUTPUT & FEATURES
Model Output
Voltage		 Maximum Load Output
Regulation		 Ripple
Noise 		Convection Total Power
 10 CFM Forced Air Total Power Efficiency
Level
Convection
 10 CFM
Forced Air
B13085-05 +5V 8.00A 10.0A ±3% 50mV 40W 50W VI
B13085-12 +12V 5.00A 7.10A ±3% 120mV 60W 85W VI
B13085-15 +15V 4.00A 5.67A ±3% 150mV 60W 85W VI
B13085-18 +18V 3.62A 4.73A ±3% 150mV 65W 85W VI
B13085-24 +24V 2.71A 3.54A ±3% 150mV 65W 85W VI
B13085-28 +28V 2.33A 3.04A ±3% 150mV 65W 85W VI
B13085-36 +36V 1.81A 2.36A ±3% 200mV 65W 85W VI
B13085-48 +48V 1.36A 1.78A ±3% 200mV 65W 85W VI
Note:
  1. Ripple and noise are measured under typical rated input voltage and at oscilloscope 20MHz bandwidth by a 100uF electrolytic capacitor and a 0.1uF ceramic capacitor in parallel at output connector.
  2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
  3. The switching frequency of this series is set within 50KHz to 100KHz at full load.
  4. 28V & 36V UL/c-UL Pending.
Loading...
Contact Us